Motorola H12 User Manual - Page 4

Press x or w to adjust the hour. Repeat Steps 6 and 7 until you have set both digits of the minutes field and the method of time measurement (AM, PM, or 24hr) field. If this is a one-time only alarm, also use Steps 6 and 7 to set the month, date, and year fields. If this is a daily alarm, leave the dashes (--) in the date fields and go to the next step. Note: Only AM or PM can be changed. If you are using the 24hr time measurement, you cannot change it here. Press t to accept the alarm setting. R In the upper-left corner of the pager, is displayed, indicating the alarm is R set. When the alarm expires, flashes and the pager either vibrates or emits R an audible alert until you press a button. If it is a one-time alarm, disappears from the Status screen after you press a button. Quiet Time The pager can receive and store new messages without any alerts for a certain period of time on a daily basis, regardless of whether the pager is in audible or silent alert mode. All you have to do is turn Quiet Time on and set the time period desired. After you turn quiet time on, it activates on a daily basis W (indicated by in the upper-left corner of the pager) until you turn it off. Œ On the Function menu, press v to move to j (SET QUIET TIME). SETTING UP SETTING UP Press t. The Set Quiet Time screen is displayed and the quiet time 7 c indicator (either if off or if on) flashes. Pager status Quiet Time turned off indicator H Y L› START ):)) m )%/)! END 7 12:00- 12:00- Set Quiet Time Screen example 7 c c 7 Press x or w to turn quiet time on (from to ) or off (from to ). If you are turning off quiet time, skip to Step 10. Press s to move to the starting hour field. Press x or w to adjust the hour. Press s to move to the first digit of the minutes field. Press x or w to adjust the first digit of the minutes. Repeat Steps 6 and 7 for the second digit of the minutes field and for the method of time measurement field. You can change between AM and PM, but if you are using the 24hr time measurement, you cannot change it here. Repeat Steps 4 through 8 to enter the ending quiet time setting. Note: If the end time is equal to the start time, the Quiet Time function is turned off. 11 12 When you are finished, press t to accept the selected quiet time period. One of the following indicators is displayed in the upper-left corner of the screen: W - Quiet time on with no unread messages W H with flashing - Quiet time turned on with stored, unread messages. H - Quiet time off with no unread messages. H flashing - Quiet time off with stored, unread messages. Note: When quiet time is turned on and the pager is set for audible alert, Y is displayed in the upper-left corner of the pager except during the actual quiet time period. SETTING UP PERSONAL MESSAGES Receiving/Reading a Personal Message H A flashing in the upper-left corner indicates there is at least one unread message in your pager. If programmed with reminder alerts, your pager alerts periodically to remind you there are unread messages. Each flashing personal D message indicator ( ) on the Status screen represents an unread message. A D non-flashing represents a previously read message. If your pager has not received any messages, there are no personal message indicators displayed on the Status screen. When your pager has received a message and an alert is being emitted use the following steps to read the message. Œ Press any button to stop the alert. The new message is automatically stored, along with the time and date it was received. The Status screen displays the number of the message (03: in this example because it is in the third message slot) and the first line of the message. Pager status Personal messages received First line of new message HY L› ):)m) DDPDDD R qh a )%/)! o b 03:Call me before you New Message example 13 14