Motorola HMN9013 User Manual - Page 43
Delete a Nuisance Channel/ Talkgroup, Restore Channels/Talkgroups to the Scan
View all Motorola HMN9013 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
SCAN DELETE A NUISANCE CHANNEL/ TALKGROUP Restore Channels/Talkgroups to the Scan List Note: Your dealer/programmer must preprogram a button to access this feature (see page 24). If a channel or talkgroup continually generates unwanted calls or noise (a "nuisance" channel/ talkgroup), you can temporarily remove it from the scan list: 1 While the radio is on the nuisance channel/ talkgroup, press the preprogrammed Nuisance Channel Delete button until you hear a tone. 2 Release the Nuisance Channel Delete button. The nuisance channel/talkgroup is deleted. Note: You cannot temporarily delete the channel/talkgroup that has been preprogrammed by your dealer/ programmer as your designated scan channel/talkgroup, a priority channel/ talkgroup, or the last remaining channel/talkgroup in the scan list. 1 Power off the radio. Once the radio is powered on again, the deleted nuisance channels/ talkgroups are restored to the scan list. - or - Press the preprogrammed Scan button to stop the scan. 2 Press the preprogrammed Scan button again to start scanning again. The deleted nuisance channels/talkgroups are restored to the scan list. - or - Select a channel/talkgroup that has not been preprogrammed for scan by your dealer / programmer to stop Scan. Once you return to the original channel/talkgroup, the deleted nuisance channels/talkgroups are restored to the scan list. 41 English