Motorola IT6-2 User Guide - Page 33
Advanced settings, Reset, Call barring
View all Motorola IT6-2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
M 3. Enter the 4 digit master PIN and press . Display shows the first registered handset number. u d M 4. Scroll or to select the handset you want to delete and press . Unregistered is displayed on the handset screen. 8.9 PIN The 4-digit master PIN is used when registering or Un-register a handset and when changing some settings on your IT6. The default setting is 0000. You can change this PIN for more security. M d M 1. Press , scroll to Advanced Set and press . 2. Scroll d to PIN. Press M. M 3. Enter the current 4 digit master PIN and press . (Default setting 0000). M 4. Enter the new PIN and press . e 5. Press to return to standby. NOTE Make a note of your PIN. If you forget your PIN you will need to reset your product. 8.10 Reset This will reset your IT6 to its default settings. M d M 1. Press , scroll to Advanced Set and press . 2. Scroll d to Reset. Press M. M 3. Confirm? is displayed. Press . NOTE Entries stored in the phonebook are retained. After reset, depending on your country, the welcome mode setting may be shown on the handset display. 8.11 Call barring Prevent certain numbers from being dialed from your IT6. Store up to four specific numbers, each up to 4 digits - for example, international or local prefixes. Bypass Call barring by switching the setting to Off. NOTE If you switch Call barring ON, Bar Mode On will be displayed on your screen in standby mode. 8.11.1 Switch call barring ON / OFF M d M 1. Press , scroll to Advanced Set and press . d M 2. Scroll to Call Barring. Press . M 3. Enter the master PIN (default setting 0000) and press . Advanced settings 33