Motorola SCOUTTRAINER25 User Guide - Page 10

Attach the Adjustable Strap to the Pet Collar Unit, Insert and Remove Battery on the Pet Collar Unit

Get Motorola SCOUTTRAINER25 PDF manuals and user guides View all Motorola SCOUTTRAINER25 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 10 highlights

2.2 Attach the Adjustable Strap to the Pet Collar Unit IMPORTANT Power off the Pet Collar Unit before attaching the strap. 1. Set the Pet Collar Unit facing down with the Collar Contacts facing up. 2. With the front side of the buckle facing down, thread the strap through the first slot, moving it towards the second slot. Collar Contacts Slot Slot 3. Continue to thread through the second slot. 2.3 Insert and Remove Battery on the Pet Collar Unit IMPORTANT Do not install the battery while the Pet Collar Unit is strapped to your dog. The Pet Collar Unit uses a replaceable battery (CR2450). Small cross-head or Flat end screwdriver. 1. Use a small cross-head or flat end screwdriver to unscrew the battery compartment cover as shown above. 2. Place the battery with negative pole (-) facing upwards in the compartment. 10 Getting Started

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
10
Getting Started
2.2
Attach the Adjustable Strap to the Pet Collar Unit
IMPORTANT
Power off the Pet Collar Unit before attaching the strap.
1.
Set the Pet Collar Unit facing down with the Collar Contacts facing up.
2.
With the front side of the buckle facing down, thread the strap through the
first slot, moving it towards the second slot.
3.
Continue to thread through the second slot.
2.3
Insert and Remove Battery on the Pet Collar Unit
IMPORTANT
Do not install the battery while the Pet Collar Unit is strapped to your dog.
The Pet Collar Unit uses a replaceable battery (CR2450).
1.
Use a small cross-head or flat end screwdriver to unscrew the battery
compartment cover as shown above.
2.
Place the battery with negative pole (-) facing upwards in the
compartment.
Slot
Slot
Collar Contacts
Small cross-head or
Flat end screwdriver.