Motorola SCOUTTRAINER25 User Guide - Page 16

Using the Pet Collar Unit

Get Motorola SCOUTTRAINER25 PDF manuals and user guides View all Motorola SCOUTTRAINER25 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 16 highlights

3. Using the Pet Collar Unit 3.1 Powering On/Off the Pet Collar Unit To power on, press and hold the POWER KEY on the Pet Collar Unit. The Power LED will light up in green for 5 seconds. To power off, press and hold the POWER KEY the green Power LED light goes off. on the Pet Collar Unit until 3.2 Pairing with the Remote Control Unit Your Remote Training System can pair with up to 2 Pet Collar Units. The Remote Control Unit and Pet Collar Unit provided are already paired. They will communicate with each other once they are powered on. You do not need to pair them again unless the Pet Collar Unit loses its link with the Remote Control Unit. To pair them again, follow the procedures below: 1. Power on both the Remote Control Unit and Pet Collar Unit (see "Powering On/Off the Remote Control Unit" on page 17 and "Powering On/Off the Pet Collar Unit" on page 16). 2. Press and hold the PAIR KEY on the Pet Collar Unit. The Power LED flashes in Green on the Pet Collar Unit and the Remote Control Unit displays a flashing symbol. 3. Press the TONE KEY on the Remote Control Unit within 12 seconds to complete the pairing process. NOTE To test if the units are linked, press and hold the TONE KEY on your Remote Control Unit. The Pet Collar Unit should emit a beep tone. 16 Using the Pet Collar Unit

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
16
Using the Pet Collar Unit
3. Using the Pet Collar Unit
3.1
Powering On/Off the Pet Collar Unit
To power on, press and hold the
POWER KEY
on the Pet Collar Unit.
The Power LED will light up in green for 5 seconds.
To power off, press and hold the
POWER KEY
on the Pet Collar Unit until
the green Power LED light goes off.
3.2
Pairing with the Remote Control Unit
Your Remote Training System can pair with up to 2 Pet Collar Units. The Remote
Control Unit and Pet Collar Unit provided are already paired. They will
communicate with each other once they are powered on. You do not need to
pair them again unless the Pet Collar Unit loses its link with the Remote Control
Unit. To pair them again, follow the procedures below:
1.
Power on both the Remote Control Unit and Pet Collar Unit (see “Powering
On/Off the Remote Control Unit” on page 17 and “Powering On/Off the
Pet Collar Unit” on page 16).
2.
Press and hold the
PAIR KEY
on the Pet Collar Unit.
The Power LED flashes in Green on the Pet Collar Unit and the Remote
Control Unit displays a flashing
symbol.
3.
Press the
TONE KEY
on the Remote Control Unit within 12 seconds
to complete the pairing process.
NOTE
To test if the units are linked, press and hold the
TONE KEY
on your
Remote Control Unit. The Pet Collar Unit should emit a beep tone.