Motorola T5820 User Manual - Page 20
Channel, Interference Eliminator Code, Then press
UPC - 723755564022
View all Motorola T5820 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Remember that FRS radios operate at 0.5 watts of transmit power. On channels1-7, your radio operates at 1 watt. In certain situations, when talking to FRS radios on channels 1-7, it is possible that they will be able to hear you, but you will not be able to hear them. This is because you are transmitting with more power (1 watt) than the FRS radio (0.5 watts). If this occurs, you must move closer to the other person to have clear, two-way communication. Talking and Listening Channel 1. With radio On, press \ , Current Channel will begin to flash. 2. Use [ and ] to change Channel while flashing. 3. Press M to set new Channel. Interference Eliminator Code The interference eliminator codes help minimize interference by providing you with a choice of code combinations. 22 • To set the code, press \ until the code display begins to blink. • Then press [ or ] to set the code. • Press M to save the code setting. You can specify a different code for each channel. To set a channel and code combination, press \ and then press [ or ] to select the channel. Press \ again and then press [ or ] to select a code. Press M to exit the menu and to save the 16