NEC LCD2490WUXIBKSV MultiSync LCD2090UXi-BK-SV : spectraview II user's guide - Page 26
Information window - Curves tab
![]() |
UPC - 805736018011
View all NEC LCD2490WUXIBKSV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
26 | SPECTRAVIEW II - USER'S GUIDE Information window - Curves tab The Curves tab graphically illustrates the various tone response and correction curves measured and generated during the calibration process. Show Curve Type Target - illustrates the target tonal response curve of the currently selected Target. This display will be calibrated to match this curve. This curve will be disabled and not shown if the Target Gamma is set to Monitor Native Gamma. Calibrated - illustrates the actual measured tonal response curves of the calibrated display. These curves are generated from measurements taken while generating an ICC/ColorSync monitor profile of the display. If no ICC/ColorSync profile was generated after the monitor was calibrated, then this checkbox will be disabled. Uncalibrated - illustrates the actual measured tonal response curves of the uncalibrated display, without any corrections applied to the Look Up Tables. These curves are generated from measurements taken during the calibration process. Correction - illustrates the correction that is applied to the display's Look Up Tables in order to achieve the selected Target tonal response curve characteristics. Show Curve Color The All, Red, Green and Blue buttons select which curve colors are displayed on the graph.
![](/manual_guide/products/nec-lcd2090uxibksv-multisync-lcd2090uxibksv-spectraview-ii-users-guide-de12633/26.png)