NEC MA431-MPi4E User Manual English - Page 104
Protect
View all NEC MA431-MPi4E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 104 highlights
PROTECT PROTECT MENU POWER SAVE SETTINGS POWER SAVE TIME SETTING POWER SAVE MESSAGE QUICK START THERMAL MANAGEMENT FAN CONTROL FAN SPEED DISPLAY FAN STATUS INTERNAL TEMPERATURE SLOT FAN STATUS INTERNAL TEMPERATURE SYSTEM FAN REQUIREMENT OPTION COMPUTE MODULE Enables or disables the monitor entering power saving mode. When [ENABLE] is selected, the monitor goes into power saving mode after the period of time has passed with no input signal detected or signal loss has occurred. When the monitor is in power saving mode, the LED power indicator will change color. Refer to the Power indicator table (see page 73). When [DISABLE] is selected, the monitor doesn't go into power saving mode. Please refer to the monitor's specifications (see "P435" on page 76, "P495" on page 77, "P555" on page 78, "MA431" on page 79, "MA491" on page 80 and "MA551" on page 81) for power consumption information. NOTE: • When the monitor is connected to a computer, the computer's display adapter may not stop sending digital data even though there is no image on-screen. If this occurs the monitor will not switch into standby mode. • If [AUTO OFF] or [CUSTOM] is selected in [HUMAN SENSING]*1, the power save function does not work. *1: This function is available only when connecting the optional sensor unit. Sets the amount of time the monitor should wait for input signal before going into power save mode. Shows a message as the monitor is entering low power mode. When [ENABLE] is selected, the monitor will quickly return to the [ON] state when a signal is detected. Enabling this option increases standby power consumption. When [AUTO] is selected, the fans will only turn on when the internal temperature reaches the temperature set at any one of the sensors in this menu. The fans will automatically turn off when the monitor is cooler. When [ON] is selected the fans are always on. The fans cannot be turned off manually. Use the + and - button on the remote control to adjust the maximum internal temperature the monitor can reach before the fan turns on when [AUTO] is selected. The [FAN SPEED] can be adjusted between LOW and HIGH. Shows the status of the internal temperature of the monitor. Shows the status of the monitor's internal fan. Shows the internal temperature of the monitor. Shows the internal temperature of the Option Board. Shows the status of the fan for the Option Board. Shows the internal temperature of the Option Board. Show the requirement operation from the Option Board. English−100