NEC MA431-MPi4E User Manual English - Page 77

Power Indicator Patterns, Interference in TV

Get NEC MA431-MPi4E PDF manuals and user guides View all NEC MA431-MPi4E manuals
Add to My Manuals
Save this manual to your list of manuals

Page 77 highlights

Snowy picture, poor sound in TV • Check antenna/cable connection. Use new cable if necessary. The USB Hub does not operate • Check to make sure that the USB cable is properly connected. Refer to your USB device user's manual. • Check that the USB upstream port on the monitor is connected to the USB downstream port on the computer. Please make sure the computer is [ON] or [USB POWER] is [ON]. Interference in TV • Check components for shielding, move away from monitor if necessary. USB or RS-232C or LAN control is not available • Check RS-232C (reverse type) or the LAN cable. A category 5 or higher LAN cable is required for connection. • Check USB cable connected to USB-B port. Check the [EXTERNAL CONTROL] is set to [ENABLE] then [PC SOURCE] is set to [EXTERNAL PC]. The monitor goes into standby automatically • Please check [OFF TIMER] setting. • Set the [CEC] function to [OFF]. The monitor may go into standby mode when a connected HDMI-CEC supported device goes into standby. • Please check [POWER] in the [SCHEDULE INFORMATION]. Power Indicator Patterns LED on the monitor is not lit (no blue or red color can be seen) (see page 33) • Make sure the power cord is properly connected to the monitor and the wall, and make sure the monitor's main power switch is ON. • Make certain the computer is not in a power-saving mode (touch the keyboard or move the mouse). • Check that the [POWER INDICATOR] is set to [ON] in the [CONTROL] settings of the OSD menu. LED colors, except for blue, are blinking or glowing • A certain failure might have occurred, please contact your supplier. • If the monitor is powered off due to the internal temperature being higher than the normal operating temperature, the LED will blink green or amber or red six times. Please leave the monitor to cool down for a few minutes then turn it on again. • The monitor could be in standby. Press the power on button on the remote control or press the ⏻ button on the monitor. English−73

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
English−73
Snowy picture, poor sound in TV
•
Check antenna/cable connection. Use new cable if
necessary.
The USB Hub does not operate
•
Check to make sure that the USB cable is properly
connected. Refer to your USB device user’s manual.
•
Check that the USB upstream port on the monitor is
connected to the USB downstream port on the computer.
Please make sure the computer is [ON] or [USB
POWER] is [ON].
Interference in TV
•
Check components for shielding, move away from
monitor if necessary.
USB or RS-232C or LAN control is not available
•
Check RS-232C (reverse type) or the LAN cable.
A category 5 or higher LAN cable is required for
connection.
•
Check USB cable connected to USB-B port.
Check the [EXTERNAL CONTROL] is set to [ENABLE]
then [PC SOURCE] is set to [EXTERNAL PC].
The monitor goes into standby automatically
•
Please check [OFF TIMER] setting.
•
Set the [CEC] function to [OFF]. The monitor may go into
standby mode when a connected HDMI-CEC supported
device goes into standby.
•
Please check [POWER] in the [SCHEDULE
INFORMATION].
Power Indicator Patterns
LED on the monitor is not lit (no blue or red color
can be seen) (see
page 33
)
•
Make sure the power cord is properly connected to the
monitor and the wall, and make sure the monitor’s main
power switch is ON.
•
Make certain the computer is not in a power-saving
mode (touch the keyboard or move the mouse).
•
Check that the [POWER INDICATOR] is set to [ON] in
the [CONTROL] settings of the OSD menu.
LED colors, except for blue, are blinking or
glowing
•
A certain failure might have occurred, please contact
your supplier.
•
If the monitor is powered off due to the internal
temperature being higher than the normal operating
temperature, the LED will blink green or amber or red six
times. Please leave the monitor to cool down for a few
minutes then turn it on again.
•
The monitor could be in standby.
Press the power on button on the remote control or
press the
⏻
button on the monitor.