NEC MA431-MPi4E User Manual English - Page 99
Audio
View all NEC MA431-MPi4E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
PICTURE MENU PICTURE SIZE Sets the Active Picture size. Press the SET/POINT ZOOM button to adjust the picture size. Press + button or CH/ZOOM+ button to expand. Press - button or CH/ZOOM- button to reduce. NOTE: • When [MULTI PICTURE MODE] is set to [2PIP] and [ACTIVE PICTURE] is set to [PICTURE1], this function is deactivated. • When [MULTI PICTURE MODE] is set to [4PBP], this function is deactivated. PICTURE POSITION Sets the [ACTIVE PICTURE] location. Pressing the + button moves the Active Picture to the right, and pressing the - button moves it to the left. Pressing the button moves the Active Picture up, and pressing the button moves it down. NOTE: • When [MULTI PICTURE MODE] is set to [2PIP] and [ACTIVE PICTURE] is set to [PICTURE1], this function is deactivated. • When [MULTI PICTURE MODE] is set to [4PBP], this function is deactivated. ROTATE Sets the multi-screen rotation. NOTE: • The [POINT ZOOM] function will not work if this function is enabled. • This function is canceled when [DisplayPort VERSION] in [DisplayPort1] is set to [1.4] or [SCREEN SAVER] is set to [MOTION] or [IMAGE FLIP] is set to [NONE]. • If input signal is Interlaced signal this function is disabled. • If input is DisplayPort 4K (60 Hz) 10bit, this function is disabled. ROTATE ALL Rotate all pictures. PICTURE1 Rotates [PICTURE1]. PICTURE2 Rotates [PICTURE2]. RESET Resets all PICTURE settings back to factory settings except for [PICTURE MODE] and [SPECTRAVIEW ENGINE]. *1: This function is only available when Raspberry Pi Compute Module Interface Board and Raspberry Pi Compute Module are installed. See page 83. *2: This function depends on which Option Board you are using. This function is only available when Option Board is installed. *3: This function is available only when connecting the optional sensor unit. AUDIO AUDIO MENU AUDIO MODE VOLUME BALANCE STEREO/MONO SURROUND Provides pre-configured audio settings suitable for various environments where this device may be used, or customize settings to viewer preference. NATIVE: Standard setting. RETAIL: Surround sound for clarity of audio in retail stores. CONFERENCING: Optimized settings for clarity of audio in conference rooms. HIGHBRIGHT: Lowest volume level in order to focus on the visual message (audio is mute). TRANSPORTATION: Lowest volume level in order to avoid disturbance in public spaces (audio is mute). CUSTOM: Customizable settings. Increase or decrease output volume level. Select [STEREO] or [MONO] for the audio output. STEREO: Independent audio channels for routing audio signal. Sound balance between the left and right speakers can be adjusted. - Press the + button to move the audio signal to the right. - Press the - button to move the audio signal to the left. MONO: Audio signals are routed through a single audio channel. Balance cannot be adjusted and the slider will be unavailable. Artificially produces surround sound audio. NOTE: [LINE OUT] is disabled when this function is set to [ON]. English−95