NEC MA431-MPi4E User Manual English - Page 51
White copy
View all NEC MA431-MPi4E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
White copy This function can be used to "copy" the luminance and white point from another monitor when used in a multi-monitor installation. This process is done by measuring the color of a monitor and setting those measured values into the monitor being adjusted. This can be useful in situations where it is necessary to match a monitor in color to neighboring monitors without having to recalibrate all monitors. Before starting, it is necessary to input a full-white video signal to all of the monitors. Select the monitor that will be used as the Target - or source - of the copy operation (A). This function will measure the luminance and white point of the target monitor (A), and set these values to the current Picture Mode of the destination monitor (B). You can also fine-tune the measurement result while checking the screen color. If you want to return to the measured value, select re-measurement. The Self Calibration function must have been previously performed before this function is available on the OSD menu. USB color sensor B A Service (2A) port Monitor A - SOURCE monitor of white point to copy. Monitor B - This monitor which performs a copy. NOTE: When adjusting the color of multiple monitors, we recommend that you perform [SELF CALIBRATION] from [WHITE COPY]. English−47