NEC NC900C-A User Manual - Page 42
Table of adjustment menus - brightness
View all NEC NC900C-A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
4. Using Menus 4-2. Table of adjustment menus Menus in parentheses are menus for our service personnel. Normally, these menus cannot be used. Main menu Title Select Configuration Submenu "Title Memory Name" TEST Pattern Lamp Setup Adjust Lamp Mode Lens Control Lens Position Focus Zoom Reset (FactoryDefault) (Setup) Lamp Usage Filter Usage (Fan Usage) (Douser Count) Douser Setup Panel Key Lock Auto Key Lock 3D Connector (Title Setup) Information (Installation) Preset Button Lamp Preset Button Usage Error Code Version IP Address Setup Date Option Status Unlit Mode Off Timer Filter Message Silent Mode Option Slot Orientation Lens Center Baudrate Date/Time New Router Setup Fan Speed Mode Preset Button 1-16 Output Voltage Preset Button 1-16 System SIB IMB Slave Ballast System Description Selects the title of the signal to be projected. Selects the test pattern to be projected. Adjusts lamp brightness. Selects the lamp to use. Adjusts the position of the projected screen. Adjusts the size and focus of the projected screen. Returns the settings to their default values. Selects between preset buttons and titles only, LAN settings only and all settings. Initializes the usage time of the lamp. Initializes the usage time of the air filter. Initializes the usage time of the fan. Resets the number of times the douser has been used. Sets the douser open/close state. Locks the buttons on the projector's control panel so that they cannot be operated. Enables or disables Auto Key Lock. Sets the signal input terminal for a 3D image system (3D terminal or GPI/O terminal). Sets the video input port for 3D video systems. Sets the projector operation when the lamp does not turn on. Sets the time until the projector power is turned off automatically. Sets the time to display the message indicating the air filter replacement cycle. Selects whether to use the status indicator, buzzer, indicators on the control panel and backlight. Configures the device installed in slot A (only when the projector is in standby mode). Sets the projection method and cooling fan operating mode. Moves the lens shift position to the center. Sets the PC control connector (RS-232) data transmission speed (bps). Sets the date and time on the projector. Sets the router with the default settings when the router built-in the projector has been replaced. Sets the cooling fan operating mode. Sets the title to be assigned to the preset buttons ( to buttons). Displays the lamp output setting. Displays the lamp voltage value. Displays the titles which are assigned to the preset buttons ( to buttons). Displays information related to projector usage. Displays the currently occurring error. Displays the model name and various version information about the projector. Displays the model and version of the signal input board (SIB). Displays the vendor name and version information about the media block (IMB). Displays the slave firmware version of the projector. Displays the ballast firmware version of the projector. Displays the IP address of the projector. Displays the date when the projector was set up (starting date of the warranty period). Displays the link status of the device mounted in slot A and projector. Reference page 43 43 44 44 45 45 - 46 46 - - - - - - 47 47 47 47 48 48 48 49 49 49 49 49 50 50 42