NEC NC900C-A User Manual - Page 77

77

6. Appendix

6-6. Specifications

Model name

NC900C-A

Projection method

3 chip DLP Cinema® method

0.69-inch DC2K chip

Panel resolution

2048 x 1080

Lamp type

350W AC lamp

Screen sizes

7 m to 8.1 m @14ft-L / Screen Gain 1.3, Max. 9.5 m @14ft-L / Screen Gain 1.8 (Depends on setup conditions)

Contrast ratio

1600:1 with DCI specified color representation

Lens adjustment function

Motorized lens shift (vertical/horizontal), motorized zoom, motorized focus, douser

Signal input ports

When shipped from factory: Empty

(for mounting optional components) (Note 1)

External Control

RS-232C (D-sub 9pin) x 1

GPIO port (D-sub 37 pin) x 1

Service terminal (stereo mini jack) x 1

3D CTL (D-sub 15 pin) x 1

USB (Type A) x 1

Interlock port x 1

Ethernet port (G-bit RJ-45) x 1

Power supply voltage

AC 100 to 130 V, 50/60 Hz single phase

AC 200 to 240 V, 50/60 Hz single phase

Input current

10.3 to 7.9 A (100 to 130 V)

5.1 to 4.3 A (200 to 240 V)

Power consumption

1023 W (100 to 130 V) (Note 2)

985 W (200 to 240 V) (Note 2)

Cooling method

Cooling air system (includes dust filter)

Noise level

Less than 52 dB

Installation

Orientation: Desktop/front, Desktop/rear, Ceiling/front, Ceiling/rear

Net weight

44 kg (Excluding lens)

Dimensions

621 mm (W) x 798 mm (D) x 314 mm (H) (Does not include protruding portions, includes foot.)

Environment

Operating temperature: 10 to 35°C

Operating humidity: 10 to 85% (non-condensing)

Storage temperature: -10 to 50°C

Storage humidity: 10 to 85% (non-condensing)

Operating altitude: 0 to 3000m/9800 feet (1600m/5500 feet to 3000m/9800 feet: Set “Fan Speed Mode” to “High

Altitude”)

Regulations

<Safety>

<EMC>

USA

UL60950-1 2nd Edition

FCC Part15 Class A

Canada

CSA60950-1 2nd Edition

ICES-003 Class A

Europe

EN60950-1 2nd Edition

EN55022 Class A, EN55024, EN61000-3-2/-3-3

Russia

IEC60950-1 2nd Edition, GOST-R, Hygenic

EN55022 Class A, EN55024, EN61000-3-2/-3-3

Oceania

IEC60950-1 2nd Edition

AS/NZS CISPR. 22 Class A

Asia

IEC60950-1 2nd Edition

EN55022 Class A, EN55024, EN61000-3-2/-3-3

Korea

K60950-1

K00022 Class A, K00024

Saudi Arabia

SASO

EN55022 Class A, EN55024, EN61000-3-2/-3-3

Japan

J60950-1

VCCI Class A, JIS C 61000-3-2, J55022 Class-A

(Note 1) The video input slots are empty when the device is shipped. The optional Signal Input Board is available as separate

optional products.

(Note 2) The value is typical.

* Note that these specifications and design can change without prior notice.

Section	Page
START MENU	1
Important Information	2
Table of Contents	6
1. What’s in the Box? and the Names of the Projector Parts	7
1-1. Features	7
1-2. What’s in the Box?	9
1-3. Names of the Projector Parts	10
1-3-1. Front of the Projector	10
1-3-2. Rear of the projector	11
1-3-3. Bottom of the projector	12
1-3-4. Connection terminals	13
1-3-5. Control panel	14
2. Installation and Connection	16
2-1. Steps for setting up and connecting	16
2-2. Connecting the Power Cable	17
2-3. Connecting the image input terminals	22
2-4. Connecting the various control terminal	22
3. Projection of Images (Basic Operation)	23
3-1. Steps of projecting images	23
3-2. Turning your projector on	24
3-3. Selecting the title of input signal	27
3-4. Adjusting the position and the size of projected screen	28
3-4-1. Displaying the test pattern	28
3-4-2. Adjusting the position of the projected screen (Lens shift)	29
3-4-3. Adjustment of the size (zoom) and focus of the projected screen	30
3-4-4. Adjusting the brightness of the projected screen (Lamp output)	31
3-4-5. Adjusting the brightness of the projected screen (Lamp mode)	32
3-5. Preventing misoperations	33
3-5-1. KEY LOCK setting	33
3-5-2. Turning KEY LOCK off	33
3-6. Turning on/off the lamp with the projector turned on	34
3-6-1. Turning off the lamp	34
3-6-2. Turning on the lamp	34
3-7. Turning your projector off	35
4. Using Menus	37
4-1. Basic operation with adjustment menus	37
4-1-1. Screen display	37
4-1-2. Operating menus	39
4-1-3. How to enter alphanumeric characters	41
4-2. Table of adjustment menus	42
4-3. Title Select	43
4-3-1. Title select (Title Memory)	43
4-3-2. Test Pattern	43
4-4. Configuration	44
4-4-1. Lamp Setup	44
4-4-2. Lens Control	45
4-4-3. Reset	46
4-5. Title Setup	47
4-6. Information	47
4-6-1. Lamp	47
4-6-2. Preset Button	47
4-6-3. Usage	48
4-6-4. Error Code	48
4-6-5. Version	48
4-6-6. IP Address	49
4-6-7. Setup Date	50
4-6-8. Option Status	50
5. Maintenance of Your Projector	51
5-1. Cleaning the Cabinet	51
5-2. Cleaning the Lens	51
5-3. Replacing the Lamp and the Air Filter	52
5-3-1. Warnings About Replacing the Lamp	52
5-3-2. Warnings About Replacing the Air Filter	53
5-3-3. Procedure for Replacing the Lamp and Air Filter	54
5-3-4. Replacing the Lamp	54
5-3-5. Replacing the Rear Air Filter	59
5-3-6. Replacing the Side Air Filter	62
5-3-7. Resetting the Lamp Usage Time and Air Filter Usage Time	64
6. Appendix	65
6-1. Troubleshooting	65
6-1-1. Problems and where to check	65
6-2. Indicator display list	66
6-2-1. Preset buttons	66
6-2-2. KEY LOCK button	66
6-2-3. POWER button	67
6-2-4. DOUSER button	67
6-2-5. LAMP ON/OFF button	67
6-2-6. STATUS indicator	68
6-3. Operation using an HTTP browser	69
6-3-1. Overview	69
6-3-2. Preparation before use	69
6-3-3. Handling of the address for operation via a browser	69
6-3-4. Structure of the HTTP server	70
6-3-5. Downloading DCC from the projector for use	71
6-4. Writing of the log file (Save Information)	73
6-4-1. Names of log files	75
6-5. Outline Drawing	76
6-6. Specifications	77
6-7. Power Cable	78
6-8. Pin Assignment and Functions of Terminal	80
6-8-1. PC CONTROL connector (RS-232) (D-Sub 9 pin)	80
6-8-2. External control connector (GP I/O) (D-Sub 37 pin)	81
6-8-3. 3D connector (D-sub 15 pin)	86

NEC NC900C-A User Manual - Page 77

Specifications - dlp

Page 77 highlights