NEC NP500 Users Manual - Page 53
(8) Using the VGA Signal Cable to Operate the Projector (Virtual Remote)
UPC - 805736024418
View all NEC NP500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
4. Convenient Features 8 Using the VGA Signal Cable to Operate the Projector (Virtual Remote) Overview The projector supports DDC/CI (Display Data Channel Command Interface) that is a standard interface for bidirectional communication between display/projector and computer. The optional utility software "Virtual Remote Tool" designed exclusively for our projector is required to use DDC/CI. Check with our website. http://www.nec-pj.com NOTE: Use the supplied VGA signal cable to connect the COMPUTER 1 IN connector directly with the monitor output connector of the computer to use Virtual Remote Tool. Using a switcher, scan converter or other cables than the supplied VGA signal cable may cause failure in signal communication. 44
44
4. Convenient Features
Using the VGA Signal Cable to Operate the Projector
(Virtual Remote)
Overv±ew
The projector supports DDC/CI (Display Data Channel Command Interface) that is a standard interface for bidirectional
communication between display/projector and computer.
The optional utility software “Virtual Remote Tool” designed exclusively for our projector is required to use DDC/CI.
Check with our website.
NOTE: Use the supplied VGA signal cable to connect the COMPUTER 1 IN connector directly with the monitor output connector of
the computer to use Virtual Remote Tool. Using a switcher, scan converter or other cables than the supplied VGA signal cable may
cause failure in signal communication.