NEC X554HB Users Manual - Page 22
PICTURE, ADJUST, English-20
View all NEC X554HB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Setting PICTURE Default BACKLIGHT Adjusts the overall image and background brightness. Press + or - to adjust. NOTE: When MODE1 or MODE2 is selected in ROOM LIGHT SENSING, this function cannot be changed. Depends on destination CONTRAST Adjusts the image brightness in relationship to the input signal. Press + or - to adjust. 50 NOTE: When sRGB is selected in picture mode, this function cannot be changed. SHARPNESS Adjusts the crispness of the image. Press + or - to adjust. 50*2 BRIGHTNESS Adjusts the image brightness in relationship to the background. Press + or - to adjust. 50 NOTE: When sRGB is selected in picture mode, this function cannot be changed. HUE Adjusts the hue of the screen. Press + or - to adjust. 50 NOTE: When sRGB is selected in picture mode, this function cannot be changed. COLOR Adjusts the color depth of the screen. Press + or - to adjust. 50*2 NOTE: When sRGB is selected in picture mode, this function cannot be changed. COLOR TEMPERATURE Adjusts the color temperature of the entire screen. A low color temperature will make the screen reddish. A high color temperature will make the screen bluish. If TEMPERATURE needs further adjustment, the individual R/G/B/ levels of the white point can be adjusted. To adjust the R/G/B levels, CUSTOM must be showing as the COLOR TEMP selection. NOTE: When sRGB is selected in picture mode, predefined 6500k is set so it cannot be changed. When PROGRAMMABLE1, PROGRAMMABLE2 or PROGRAMMABLE3 is selected in GAMMA CORRECTION, this function cannot be changed. 10000K COLOR CONTROL Adjusts the hue of the Red, Yellow, Green, Cyan, Blue and Magenta. 0 NOTE: When sRGB is selected in picture mode, this function cannot be changed. When INPUT2 of SUPER is selected in INPUT CHANGE and displayed, this function cannot be changed. GAMMA CORRECTION NATIVE Select a display gamma for best picture quality. NOTE: When sRGB is selected in picture mode, this function cannot be changed. Gamma correction is handled by the LCD panel. NATIVE*2 (except sRGB setting) 2.2 Typical display gamma for use with a computer. 2.4 Good for video (DVD, etc.) S GAMMA Special gamma for certain types of movies. Raises the dark parts and lowers the light parts of the image (S-Curve). DICOM SIM. DICOM GSDF curve simulated for LCD type. PROGRAMMABLE1, 2, 3 A programmable gamma curve can be loaded using NEC optional software. MOVIE SETTINGS NOTE: When INPUT2 of SUPER is selected in INPUT CHANGE and displayed, this function cannot be changed. NOISE REDUCTION*1 Adjusts the amount of noise reduction. Press + or - to adjust. 0*2 VIDEO, S-VIDEO, SCART inputs only TELECINE Automatically senses the sources frame rate for optimal picture quality. HDMI, Y/Pb/Pr, SCART*1, VIDEO*1, S-VIDEO*1, HDMI2*1, HDMI3*1, Y/Pb/Pr2*1 inputs only AUTO*2 ADAPTIVE CONTRAST Sets the level of adjustment for dynamic contrast. HDMI, Y/Pb/Pr, SCART*1, VIDEO*1, S-VIDEO*1, HDMI2*1, HDMI3*1, Y/Pb/Pr2*1 inputs only OFF PICTURE MODE Selects picture mode, [HIGHBRIGHT], [STANDARD], [sRGB], [CINEMA], [CUSTOM1] or [CUSTOM2]. See page 18. Depends on destination RESET Resets the following settings within the PICTURE menu back to factory setting: BACKLIGHT, - CONTRAST, SHARPNESS, BRIGHTNESS, HUE, COLOR, COLOR TEMPERATURE, COLOR CONTROL, GAMMA CORRECTION, MOVIE SETTINGS. ADJUST AUTO SETUP Automatically adjusts Screen Size, H position, V position, Clock, Phase and White Level. - VGA, RGB/HV*1 inputs only AUTO ADJUST VGA, RGB/HV*1 inputs only H Position, V Position and Phase are adjusted automatically when new timing is detected. OFF H POSITION Controls the horizontal position of the image within the Display area of the LCD. - All inputs except DVI, HDMI, DPORT Press + to move right. Press - to move left. V POSITION Controls the vertical position of the image within the Display area of the LCD. - All inputs except DVI, HDMI, DPORT Press + to move up. Press - to move down. CLOCK Press + to expand the width of the image on the right of the screen. - VGA, RGB/HV*1 inputs only Press - to narrow the width of the image on the left. *1: This function depends on which option board you use. *2: Depends on signal input. English-20