NEC X554HB Users Manual - Page 9

100 mm English 3. Installing and removing optional table top stand CAUTION: Installing and removing the stand must be done by two or more people. To install, follow those instructions included with the stand or mounting apparatus. Use only those devices recommended by the manufacturer. NOTE: Use ONLY thumbscrews which are included in the monitor. When installing the LCD monitor stand, handle the unit with care to avoid pinching your fingers. Optional table top stand 5. Prevent Tipping When using the display with the optional table top stand fasten the LCD to a wall using a cord or chain that can support the weight of the monitor in order to prevent the monitor from falling. Fasten the cord or chain to the monitor using the provided clamps and screws. 100 mm (X474HB) 170 mm (X554HB) Screw Holes Clamp Cord or chain Screw (M4) Table NOTE: Protective Sheet Install the stand so the long end of the feet face forward. Use the ST-4620 for the X474HB and ST-5220 for the X554HB. 4. Ventilation Requirements When mounting in an enclosed space or recessed area, leave adequate room between the monitor and the enclosure to allow heat to disperse, as shown below. 100 mm Before attaching the LCD monitor to the wall, make sure that the wall can support the weight of the monitor. Be sure to remove the cord or chain from the wall before moving the LCD. 30 mm 100 mm 100 mm Allow adequate ventilation or provide air conditioning around the monitor, so that heat can properly dissipate away from the unit and mounting apparatus; especially when you use monitors in multiple screen. NOTE: The sound quality of the internal speakers will differ according to the acoustics of the room. English-7