NEC X554HB Users Manual - Page 30
English-28, Input2, Terminal Setting, Deinterlace, Color System, Over Scan, Audio
View all NEC X554HB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
DEINTERLACE Selects the IP (Interlace to Progressive) conversion function. NOTE: For DVI input "DVI-HD" needs to be enabled in the DVI mode menu. When INPUT2 of SUPER is selected in INPUT CHANGE and displayed, this function cannot be changed. ON Converts interlaced signals to progressive. This is the default setting. OFF Disables IP conversion. This setting is best suited for motion pictures, but increases the risk of image retention. COLOR SYSTEM*1 VIDEO, S-VIDEO inputs only The selected Color System depends on the video format of the input signal. AUTO NTSC Automatically chooses Color System setting based on input signal. PAL SECAM 4.43 NTSC PAL-60 OVER SCAN Some video formats may require different scanning modes in order to best display the image. HDMI, Y/Pb/Pr, SCART*1, VIDEO*1, S-VIDEO*1, HDMI2*1, HDMI3*1 inputs only ON Image size is larger than what can be displayed. The image edge will appear cropped. Approximately 95% of the image will be shown on the screen. OFF Image size stays within the display area. The whole image is displayed on the screen. NOTE: When you use a computer with HDMI out, please set "OFF". OPTION SETTING OPTION POWER Allow the monitor to supply power to Option board slot during power save mode or standby mode. NOTE: This function should be set to ON when using power save management by slot 2 type option. AUDIO*1 Selects sound input signal according to slot2 type option's specifications. To activate DIGITAL, select OPTION for input signal and OPTION for AUDIO INPUT. NOTE: DIGITAL is activated only when OPTION is selected for input signal and OPTION for AUDIO INPUT. INTERNAL PC*1 The function is available for slot 2 type PC. OFF WARNING If OPTION POWER is OFF, a warning message appears when monitor power is turned off. NOTE: Warning message does not appear when monitor power is turned off by OFF TIMER setting or SCHEDULE setting. AUTO OFF Monitor power is automatically "OFF" when connected PC is OFF or the monitor is in power save mode. NOTE: Monitor power is not automatically "ON" when connected PC is ON. START UP PC When ON is selected, connected PC start-up. FORCE QUIT When ON is selected, it performs force-quit PC. Please use this function only when the operating system cannot be shut down manually. 120Hz (not adjustable) TOUCH PANEL (not adjustable) RESET Resets the following settings within the ADVANCED OPTION menu back to factory setting: INPUT DETECT (except the priority of input signals), INPUT CHANGE (except for INPUT1 and INPUT2), TERMINAL SETTING, DEINTERLACE, COLOR SYSTEM, OVER SCAN, AUDIO in OPTION SETTING. *1: This function depends on which option board you use. ON AUTO ON OFF ANALOG OFF OFF NO NO - English-28