Naxa NHS-2012 English and Spanish Manual - Page 10
Connecting Power, Getting Started
View all Naxa NHS-2012 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Connecting Power Getting Started Use the included AC power adapter to connect the unit to AC household power. Turning the Unit On and O • Connect the two-pronged end of the adapter to a To turn the unit on, press the STANDBY/SOURCE [7] household power outlet. button. • Connect the barrel plug end of the adapter to the Power socket [6] of the unit. To place the unit in Standby mode, press and hold STANDBY/SOURCE [7] until the SOURCE LED [2] turns red. The adapter supports AC 100-240V power only. Do not connect the power adapter to a power outlet other than that which is indicated here and on the rating label of the power adapter as this may result in the risk of fire or electric shock. Disconnect the unit from power if it will not be used for a long time. Do not handle the power plug with wet hands. Doing so may cause electric shock. Do not use the adapter with any other power source. To turn the unit off completely, disconnect the unit from power. Setting the Source Mode Press STANDBY/SOURCE [7] to set the active source mode. This controls which connection is being used. The SOURCE LED [2] will light to indicate which mode has been selected when STANDBY/SOURCE [7] is pressed. Source LED Connection Mode Blue Bluetooth® Indigo (blue + green) Optical IN [4] Violet AUX IN [5] Page 10 Naxa Electronics