Naxa NHS-2012 English and Spanish Manual - Page 11

Adjusting the Volume • Use the VOL- and VOL+ keys [9, 10] to decrease or increase the volume level, respectively. • Press the MUTE key on the remote to disable sound output completely. Press the MUTE key again to restore sound output. 3. Once you have successfully paired, you will be able to stream music wirelessly from your device to the sound bar. Some devices may allow you to control playback from the sound bar; otherwise, control playback on the device itself. 4. If the pairing attempt fails, the sound bar may have timed out. Try starting the pairing proccess again Using Bluetooth® Mode Press SOURCE to set the active mode to Bluetooth. Pairing a Bluetooth® Device You will need to pair your Bluetooth device with the sound bar the first time you use them together. 1. Press the STANDBY/SOURCE button [7] until the Source LED turns blue. 2. Enable Bluetooth on the source device and use it to search for other Bluetooth devices. (Refer to the user manual of your device if you need help with this step.) Select the NAXA NHS-2012 sound bar when the device finds it. If the device prompts you for a pass code, enter "0000". www.naxa.com Only one device can be paired with the sound bar at a time. Disable Bluetooth on other devices to prevent interference. The sound bar will try to reconnect automatically with the last paired device when it is placed in Bluetooth mode. If the Bluetooth connection is lost due to external factors, or it will not reconnect automatically, you may need to pair again with the NAXA NHS-2012. Clear the NAXA NHS-2012 from the Bluetooth device list on your source device before pairing again. Page 11