Netgear D6400 Installation guide - Page 6
Power On/Off - lights
![]() |
View all Netgear D6400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Cable or fiber Internet Modem router Ethernet cable (not included) Cable or fiber modem To connect the modem router to a cable or fiber modem: a. Unplug your modem's power, leaving the modem connected to the wall jack for your Internet service. If your modem uses a battery backup, remove the battery. b. Plug in and turn on your modem. If your modem uses a battery backup, put the battery back in. c. With an Ethernet cable, connect your modem to the red Internet port on your modem router. 2. Add power to the modem router: Modem router Power adapter a. Connect the power adapter to the modem router and plug the power adapter into an outlet. b. Wait for the Power LED to light green. If the Power LED does not light, press the Power On/Off button. 4
![](/manual_guide/products/netgear-d6400-installation-guide-b6ff583/6.png)