Netgear FS728TPv2 FS728TPv2 Hardware Installation Guide - Page 7
Features, PoE Features
View all Netgear FS728TPv2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
FS728TP Hardware Installation Guide Features The following list identifies the key features of the FS728TP: • 24-port Fast Ethernet Smart Switch with 24 PoE ports with 2 combo ports and 2 Gigabit copper uplinks. • Four 10/100/1000 Gigabit Ethernet switching ports. • Two 1000M SFP Gigabit Ethernet switching ports. • Full NETGEAR Smart Switch functionality. • Full compatibility with IEEE standards: • IEEE 802.3 CSMA/CD • IEEE 802.3i (10BASE-T) • IEEE 802.3u (100BASE-TX) • IEEE 802.3x (Full-duplex flow control) • IEEE 802.3ab (1000BASE-T) • IEEE 802.3z (1000BASE-x) • IEEE 802.3af (DTE power via MDI) • Autosensing and auto-negotiating capabilities for all ports. • Auto Uplink™ on all ports to make the right connection. • Automatic address learning function to build the packet-forwarding information table. The table contains up to 4K Media Access Control (MAC) addresses. • Store-and-Forward transmission to remove bad packets from the network. • Full-duplex IEEE 802.3x pause frame flow control. • Active flow control to minimize packet loss and frame drops. • Half-duplex backpressure control. • Per port LEDs, power LED, PoE Max, and fan. • Standard NETGEAR 7xx series chassis. • NETGEAR Green product features. PoE Features The FS728TP supports IEEE 802.3af PSE features: • Ports 1 through 24 support IEEE 802.3af, Alternative A (MDI-X). The total PoE power budget is 192 Watts, with a maximum of 15.4 Watts per PoE port. • PoE is enabled by default. Chapter 1: Introduction | 7