Netgear FS752TPS FS752TS Hardware manual - Page 13
IEEE 802.3af DTE Power via MDI, Per port LEDs, System LEDs.
View all Netgear FS752TPS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
FS700TS Hardware Installation Guide The following SFP types are supported: • 1000Base-SX • 1000Base-LX • 100Base - FX • The devices support full Netgear Smart Switch functionality. • The devices provide full compatibility with IEEE standards: • IEEE 802.3i, (10Base-T) • IEEE 802.3u (100Base-TX, 100Base-FX) • IEEE 802.3x (Full-duplex flow control) • IEEE 802.3ab (1000Base-T) • IEEE 802.3z (1000Base-X) • IEEE 802.3af (DTE Power via MDI) • Auto-sensing and auto-negotiating capabilities for all ports. • Auto Uplink™ on all ports to make the right connection. • Automatic address-learning function to build the packet-forwarding information table. The table contains up to 4K Media Access Control (MAC) addresses. • Full- and half-duplex functions for all 10/100/1000 Mbps ports. • Store-and-Forward transmission to remove bad packets from the network. • Full-duplex IEEE 802.3x pause frame flow control. • Active flow control to minimize packet loss/frame drops. • Half-duplex back-pressure control. • Per port LEDs, System LEDs. • Internal power supply. • Standard 1U high, rack mountable 19" chassis. • Fan speed control supported (optional). Introduction v1.0, September 2007 1-16