Netgear FWAG114 FWAG114 Reference Manual - Page 66
Table 6-1., Menu 3.2 - FWAG114 Status Fields
UPC - 606449026955
View all Netgear FWAG114 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Reference Manual for the ProSafe Dual Band Wireless VPN Firewall FWAG114 This screen shows the following parameters: Table 6-1. Menu 3.2 - FWAG114 Status Fields Field System Name Firmware Version WAN Port MAC Address IP Address IP Subnet Mask DHCP LAN Port MAC Address IP Address IP Subnet Mask DHCP IEEE802.11a/b/g Interface SSID MAC Address Channel/Frequency WEP Status Description This field displays the System Name assigned to the router. This field displays the router firmware version. These parameters apply to the Internet (WAN) port of the router. This field displays the MAC address being used by the Internet (WAN) port of the router. This field displays the IP address being used by the Internet (WAN) port of the router. If no address is shown, the router cannot connect to the Internet. This field displays the IP Subnet Mask being used by the Internet (WAN) port of the router. This field shows the protocol on the WAN port used to obtain the WAN IP address. This field can show DHCP Client, Fixed IP, PPPoE, BPA or PPTP. For example, if set to Client, the router is configured to obtain an IP address dynamically from the ISP. These parameters apply to the Local (WAN) port of the router. This field displays the Media Access Control address being used by the LAN port of the router. This field displays the IP address being used by the Local (LAN) port of the router. The default is 192.168.0.1 This field displays the IP Subnet Mask being used by the Local (LAN) port of the router. The default is 255.255.255.0 Identifies if the router's built-in DHCP server is active for the LAN attached devices. These parameters apply to the 802.11a Wireless port of the router. This field displays the wireless network name (SSID) being used by the wireless port of the router. The default is Wireless. This field displays the MAC address being used by the wireless port of the router. Identifies if the channel the wireless port is using. See "Wireless Channels" on page D-7 for the frequencies used on each channel. Identifies the current WEP configuration of this interface. 6-2 Maintenance