Netgear FWG114Pv1 FWG114P Reference Manual - Page 123
WAN IP, addresses, Set up the FWG114P VPN -Auto Policy illustrated below.
View all Netgear FWG114Pv1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 123 highlights
Reference Manual for the ProSafe Wireless 802.11g Firewall/Print Server Model FWG114P 4. Set up the FWG114P VPN -Auto Policy illustrated below. a. From the main menu VPN section, click on the VPN Policies link, and then click on the Add Auto Policy button. WAN IP address LAN IP addresses Figure 8-15: Scenario 1 VPN - Auto Policy b. Configure the IKE Policy according to the settings in the illustration above and click Apply to save your settings. For more information on IKE Policy topics, please see "IKE Policies' Automatic Key and Authentication Management" on page 8-3. Note: Selecting ANY for the Traffic Selectors means all traffic goes through the IPSec tunnel and prevents access to the Internet. 5. After applying these changes, all traffic from the range of LAN IP addresses specified on FWG114P A and FWG114P B will flow over a secure VPN tunnel. Virtual Private Networking March 2004, 202-10027-01 8-23