Netgear FWG114Pv1 FWG114P Reference Manual - Page 132
Netgear VPN Client to FWG114P, Configuration Profile
View all Netgear FWG114Pv1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 132 highlights
Reference Manual for the ProSafe Wireless 802.11g Firewall/Print Server Model FWG114P Netgear VPN Client to FWG114P Follow these procedures to configure a VPN tunnel from a NETGEAR ProSafe VPN Client to an FWG114P. This case study follows the Virtual Private Network Consortium (VPNC) interoperability profile guidelines. The menu options for the FVS328, FVL328, FWAG114, and FWG114P are the same. Configuration Profile The configuration in this document follows the addressing and configuration mechanics defined by the VPN Consortium. Gather all the necessary information before you begin the configuration process. Verify whether the firmware is up to date, all of the addresses that will be necessary, and all of the parameters that need to be set on both sides. Check that there are no firewall restrictions. Table 8-1. Summary VPN Consortium Scenario: Scenario 1 Type of VPN PC/Client-to-Gateway Security Scheme: IKE with Preshared Secret/Key (not Certificate-based) Date Tested: December 2003 Model/Firmware Tested: Gateway FWG114P firmware v 2.2 Client NETGEAR ProSafe VPN Client v10.1 IP Addressing: Gateway Static IP address Client Dynamic 8-32 March 2004, 202-10027-01 Virtual Private Networking