Netgear FWG114Pv1 FWG114P Reference Manual - Page 247
Appendix G NETGEAR VPN Configuration FVS318 or FVM318 to FWG114P, Configuration Template
View all Netgear FWG114Pv1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 247 highlights
Appendix G NETGEAR VPN Configuration FVS318 or FVM318 to FWG114P This appendix provides a case study on how to configure a secure IPSec VPN tunnel between a NETGEAR FVS318 or FVM318 to a FWG114P. The configuration options and screens for the FVS318 and FVM318 are the same. Configuration Template The configuration in this document follows the addressing and configuration mechanics defined by the VPN Consortium. Gather all the necessary information before you begin the configuration process. Verify whether the firmware is up to date, all of the addresses that will be necessary, and all of the parameters that need to be set on both sides. Check that there are no firewall restrictions. Table G-1. Summary VPN Consortium Scenario: Scenario 1 Type of VPN LAN-to-LAN or Gateway-to-Gateway (not PC/Client-to-Gateway) Security Scheme: IKE with Preshared Secret/Key (not Certificate-based) Date Tested: December 2003 Model/Firmware Tested: NETGEAR-Gateway A FVS318 firmware version A1.4 or 2.0; FVM318 firmware version 1.1 NETGEAR-Gateway B FWG114P with firmware version 2 Release 2 IP Addressing: NETGEAR-Gateway A Static IP address NETGEAR-Gateway B Static IP address NETGEAR VPN Configuration FVS318 or FVM318 to FWG114P G-1 March 2004, 202-10027-01