Netgear FWG114Pv2 FWG114Pv2 Reference Manual - Page 64

Reference Manual for the ProSafe Wireless 802.11g Firewall/Print Server Model FWG114P v2 • Secondary Radius Server Name/IP Address: This field is optional. If you have a Secondary Radius Server on your LAN, enter its name or IP address here. • Radius Port: Enter the port number used for connecting to the Radius Server. • Shared Key: Enter the desired value for the Shared Key. This must match the value used on the Radius server. • Radius Accounting: Enable Radius Accounting Enable this if you want to use the Radius Accounting system. If enabled, the following fields must be correct: • Radius Accounting Port: Enter the port number used for Accounting data on the Radius Server. • Update Report: Enable this if you wish to have this AP send Accounting update messages to the Radius accounting server periodically. If enabled, enter the desired Update Report interval in the field provided. 5. Click Apply to save your settings. How to Configure WPA and WPA2 with Radius Note: Not all wireless adapters support WPA and WPA2. Furthermore, client software is required on the client. Windows XP and Windows 2000 with Service Pack 3 do include the client software that supports WPA and WPA2. Nevertheless, the wireless adapter hardware and driver must also support WPA and WPA2. Consult the product document for your wireless adapter and WPA and WPA2 client software for instructions on configuring WPA and WPA2 settings. To configure WPA and WPA2 with Radius, follow these steps: 1. Log in at the default LAN address of http://192.168.0.1 with the default user name of admin and default password of password, or using whatever LAN address and password you have set up. 4-16 201-10301-02, May 2005 Wireless Configuration