Netgear GS110TP Smart Control Center User Manual - Page 20

ProSafe Smart Control Center User Guide Firmware Upgrade Note: After firmware downloading is complete, the device automatically reboots. This will briefly disrupt network traffic through the device. To upgrade the firmware you must first download a firmware upgrade file for the selected device from the NETGEAR support web site to your PC. You can then download the firmware to either Smart Switch primary or secondary storage. You can check the progress of the firmware upgrade from the Tasks tab. To upgrade firmware on the selected switch: 1. Select Maintenance > Firmware Upgrade. The Firmware Upgrade dialog will display. 2. Click the Browse button and navigate to the location on your PC containing the firmware upgrade file. 3. Select the upgrade file and click Apply. The firmware will be downloaded from your PC to the device and the device automatically reboots. 20 | Chapter 3. Maintenance