Netgear GS504 GS504 Installation Guide - Page 6

Segment Switching and Bridging from 10/100 Mbps to 1000 Mbps The Model GS504, as illustrated below, connects multiple power workgroups and servers using high-speed gigabit fiber links. Each power workgroup is anchored by a NETGEAR FS509 switch. Because each fiber link can be up to 525 m long, these workgroups can be located on separate floors or in different buildings. Key 2000 Mbps 100 Mbps 10 Mbps Server 1 Server 2 4PORT 10/100Mbps Gigabit Fiber Switch igabit Ethernet MODEL GS504SX Model GS504 Switch 9PORT Fast 10/100Mbps Ethernet Switch Model FS509 Switches Ethernet MODEL FS509 9PORT Fast 10/100Mbps Ethernet Switch Ethernet MODEL FS509 PCs PCs Model RT328 Router 9327FA Prepare the Site Before you begin installing your switch, prepare the installation site. Make sure your operating environment meets the operating environment requirements of the equipment. Characteristic Temperature Operating humidity Ventilation Operating conditions Power Requirement Ambient temperature between 0° and 40° C (32° and 104° F). No nearby heat sources such as direct sunlight, warm air exhausts, or heaters. Maximum relative humidity of 90%, noncondensing. Minimum 2 inches (5.08 cm) on all sides for cooling. Adequate airflow in room or wiring closet. At least 6 feet (1.83 m) to nearest source of electromagnetic noise (such as photocopy machine or arc welder). Adequate power source within 6 feet (1.83 m). Model GS504 4-Port Gigabit Switch Installation Guide