Netgear GS748TPS GS7xxTPS User Manual - Page 124

GS700TPS Smart Switch Software Administration Manual • Class of Service - Select the CoS tag to add to incoming packets not containing a VPT received on the Voice VLAN. The possible field values are 0-7, where zero is the lowest priority, and seven is the highest priority. • Remark CoS - Enable or disable reassigning the CoS tag value to packets received on the Voice VLAN. The possible field values are: - Disable - Disables remarking the packet CoS tag value. This is the default value. - Enable - Enables remarking the packet CoS tag value. • Voice VLAN Aging Time - Enter the Voice VLAN aging time. The Voice VLAN aging time sets the maximum inactivity time for a Voice VLAN port member after its MAC Address is aged out. If the time since the last MAC Address with telephony MAC Address was aged out exceeds the Voice VLAN aging time, the port is dropped from the Voice VLAN. The default time is one day. The field format is Day, Hour, Minute. The Voice VLAN aging time starts after the MAC Address is aged out from the Dynamic MAC Address table. The MAC Address dynamic aging default time is 300 sec. For more information on defining MAC address age out time, see "Dynamic Addresses". 2. Select the device VoiceVLAN Status in the provided field. 3. If you selected Enable in the VoiceVLAN Status field, select the VoiceVLAN ID, Class of Service, Remark CoS and enter the Voice VLAN Aging Time in the provided fields. 4. Click APPLY to update the device. Port Setting The Voice VLAN Port Setting screen allows network managers to add ports or LAGs to the Voice VLAN. To add ports or LAGs to the Voice VLAN: 1. Click Switching > Voice VLAN > Advanced > Port Setting. The Voice VLAN Port Setting screen opens: 4-25 v1.0, June 2009 Configuring Switching Settings