Netgear GS748TPS GS7xxTPS User Manual - Page 172

GS700TPS Smart Switch Software Administration Manual To configure RADIUS servers: 1. Click Security > Management Security > RADIUS. The RADIUS screen displays: Figure 6-2 The RADIUS screen contains the following fields: • Host IP Address - Enter the RADIUS Server IP address. • Authentication Port - Enter the authentication port number. The authentication port is used to verify the RADIUS Server authentication. The field default is 1812. • Number of Retries - Enter the number of transmitted requests sent to the RADIUS Server before a failure occurs. Possible field values are 1-10. The default value is 3. • Timeout for Reply - Enter the amount of time (in seconds) the device waits for an answer from the RADIUS Server before retrying the query, or switching to the next server. Possible field values are 1-30. The default value is 3. • Dead Time - Enter the default amount of time (in minutes) that a RADIUS Server is bypassed for service requests. The range is 0-200. The default value is 0. • Key String - Enter the default key string used for authenticating and encrypting all RADIUS-communications between the device and the RADIUS Server. This key must match the RADIUS encryption. • Usage Type - Select the RADIUS Server usage type. The default value is Login. The possible field values are: - Login - Indicates the RADIUS Server is used for authenticating user names and passwords. - 802.1X - Indicates the RADIUS Server is used for 802.1X authentication. - All - Indicates the RADIUS Server is used for authenticating user names and passwords, and 802.1X port authentication. 6-3 Managing Security v1.0, June 2009