Netgear GS748Tv3 GS748Tv3 User Manual - Page 20

Firmware Upgrade, Product Assigned Firmware, Browse, Upgrade Password, password, Apply., Start Upgrade - firmware download

Get Netgear GS748Tv3 - Gigabit Smart Switch PDF manuals and user guides View all Netgear GS748Tv3 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 20 highlights

Smart Switch Software User Manual GS748T have downloaded or otherwise obtained the firmware upgrade and that you have it available as a binary file on your computer. This procedure uses the TFTP protocol to implement the transfer from computer to switch. To upgrade your firmware: 1. After selecting the switch you want to upgrade, click Firmware Upgrade (see Figure 2-1). The following screen will display: Figure 2-6 2. Enter the following values into the appropriate places in the form • Product Assigned Firmware: The location of the new firmware file. You can click Browse to locate the file. For example: tftp://{tftp address}/{file name} • Upgrade Password: Enter your password; the default password is password. Click Apply. 3. Click Start Upgrade to begin loading the upgrade. The system software is automatically loaded to all stacking members. When the process is complete, the switch automatically reboots. 2-6 Using the Smartwizard Discovery Utility v1.0, October 2007

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
Smart Switch Software User Manual GS748T
2-6
Using the Smartwizard Discovery Utility
v1.0, October 2007
have downloaded or otherwise obtained the firmware upgrade and that you have it available as a
binary file on your computer. This procedure uses the TFTP protocol to implement the transfer
from computer to switch.
To upgrade your firmware:
1.
After selecting the switch you want to upgrade, click
Firmware Upgrade
(see
Figure 2-1
).
The following screen will display:
2.
Enter the following values into the appropriate places in the form
•
Product Assigned Firmware
: The location of the new firmware file. You can click
Browse
to locate the file. For example:
tftp://{tftp address}/{file name}
•
Upgrade Password
: Enter your password; the default password is
password
. Click
Apply.
3.
Click
Start Upgrade
to begin loading the upgrade. The system software is automatically
loaded to all stacking members. When the process is complete, the switch automatically
reboots.
Figure 2-6