Netgear GS748Tv3 GS748Tv3 User Manual - Page 25
System Information Settings, System > Management > System Information - firmware update
View all Netgear GS748Tv3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Smart Switch Software User Manual GS748T • Cancel. Cancels changes made to that screen. Figure 3-2 System Information Settings The main screen, System > Management > System Information, shows the condition of the functions available in the switch. Click Refresh at the bottom of the pane to display updated status information. This information is described briefly as follows: • Product Name. The name of the switch. • Firmware Version. The version of the firmware currently installed on the switch. • System Name. User supplied value (the same as sysName in MIB-2). • System Location. User supplied value (the same as the sysLocation in MIB-2). • Idle Timeout. 3 to 30 minutes. The default is 5 minutes. • DHCP. Shows whether it was enabled. • IP Address. The IP Address assigned to the switch. • Subnet Mask. The subnet of the switch. • Default Gateway. The switch gateway address. • MAC address. The MAC address of the switch. • System Up Time. Indicates how long the switch has been active. Basic Web Management 3-3 v1.0, October 2007