Netgear GSM7224 GSM7224 User Manual - Page 117
transfer upload serverip, transfer upload path
![]() |
UPC - 606449069150
View all Netgear GSM7224 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 117 highlights
User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software Format transfer upload mode transfer upload serverip This command sets the IP address of the server on which the file is located. Note: This command is valid only when the transfer mode is TFTP. See "transfer upload mode" . Default 0.0.0.0 Format transfer upload serverip transfer upload path This command sets the directory path used to upload the file. The switch "remembers" the last file path used. Note: This command is valid only when the transfer mode is TFTP. See "transfer upload mode" . GSM7224 Layer 2 Managed Switch software supports the TFTP client. The TFTP client path statement requirement is sever dependent. A path statement is generally required to set up the TFTP client; however, the client path may remain blank. See the example of the path setup. TFTP Upload Example: The TFTP upload example details three scenarios for TFTP client to server file transfer. In the example, the operator will upload the config.bin file from the switch to the location c:\tftp\ on the server. The different scenarios are detailed below: Table 3. TFTP Upload Example. TFTP Server path c:\tftp\ c:\ c: TFTP Client path blank tftp\ \tftp\ GSM7224 Layer 2 Managed Switch software provides two methods to clear the directory path statement. • The clear config command will remove the directory path statement. • The web browser clear command will remove the directory path statement. Default Format Blank transfer upload path Switching Commands 202-10010-01 7-75
![](/manual_guide/products/netgear-gsm7224-gsm7224-user-manual-e21ada3/117.png)