Netgear GSM7224 GSM7224 User Manual - Page 23
Conventions, logical slot.port
![]() |
UPC - 606449069150
View all Netgear GSM7224 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software logical slot.port number 1. The field is composed of a valid slot number and a valid port number separated by a period (.). This parameter denotes a logical slot number and logical port number assigned. This is applicable in the case of a LAG. The operator can use the logical slot number and the logical port number to configure the LAG. Conventions Network address are used to define a link to a remote host, workstation or network. Network addresses are shown using the following syntax: Table 1. Network Address Syntax Address Type Format ipAddr A.B.C.D macAddr YY:YY:YY:YY:YY:YY Range 0.0.0.0 to 255.255.255.255 (decimal) hexidecimal digit pairs Double quotation marks such as "System Name with Spaces" set off user-defined strings. If the operator wants to use spaces as part of a name parameter, then it must be enclosed in double quotation marks. Entering '@' in front of any command allows the user to reference any root command from anywhere in the tree. For example, '>config router>@show arp table' displays the ARP table even though the command was not executed from the root level. Command completion finishes spelling the command when enough letters of a command are typed to uniquely identify the command word. The command may be executed by typing (command abbreviation) or the command word may be completed by typing the or (command completion). The value 'Err' designates that the requested value was not internally accessible. This should never happen and indicates that there is a case in the software that is not handled correctly. The value of '-----' designates that the value is unknown. Command Line Interface Syntax 3-3 202-10010-01
![](/manual_guide/products/netgear-gsm7224-gsm7224-user-manual-e21ada3/23.png)