Netgear GSM7248R CLI Reference Manual - for 7200RS Series Layer-2 Stackable Sw - Page 33

Command Line Interface Reference for the ProSafe 7200RS Series Layer-2 Stackable Switches • and are parameters and represent required values that you must enter after you type the command keywords. • [gateway] is an optional parameter, so you are not required to enter a value in place of the parameter. The CLI Command Reference lists each command by the command name and provides a brief description of the command. Each command reference also contains the following information: • Format shows the command keywords and the required and optional parameters. • Mode identifies the command mode you must be in to access the command. • Default shows the default value, if any, of a configurable setting on the device. The show commands also contain a description of the information that the command displays. 2.2.2 Command Conventions In this document, the command name is in bold font. Parameters are in italic font. You must replace the parameter name with an appropriate value, which might be a name or number. Parameters are order dependent. The parameters for a command might include mandatory values, optional values, or keyword choices. Table 2-2 describes the conventions this document uses to distinguish between value types. Table 2-2. Parameter Conventions Symbol Example Description angle brackets [] square brackets {} curly braces | Vertical bars [{}] Braces within square brackets [value] {choice1 | choice2} choice1 | choice2 [{choice1} choice2}] Indicates that you must enter a value in place of the brackets and text inside them. Indicates an optional parameter that you can enter in place of the brackets and text inside them. Indicates that you must select a parameter from the list of choices. Separates the mutually exclusive choices. Indicate a choice within an optional element. Overview 2-3 v1.0, October 2008