Netgear M4100-D12G CLI Manual - Page 542
logging email logtime, logging traps, logging email test message-type
View all Netgear M4100-D12G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 542 highlights
ProSafe M4100 and M7100 Managed Switches logging email logtime This command configures how frequently non-urgent email messages are sent. Non-urgent messages are collected and sent in a batch email at the specified interval. The valid range is every 30- 1440 minutes. Default Format Mode 30 minutes logging email logtime Global Config no logging email logtime This command resets the non-urgent log time to the default value. Format Mode no logging email logtime Global Config logging traps This command sets the severity at which SNMP traps are logged and sent in an email. Specify the severitylevel value as either an integer from 0 to 7 or symbolically through one of the following keywords: emergency (0), alert (1), critical (2), error (3), warning (4), notice (5), info (6), or debug (7). Default Format Mode Info (6) messages and higher are logged. logging traps Global Config no logging traps This command resets the SNMP trap logging severity level to the default value. Format Mode no logging traps Global Config logging email test message-type This command sends an email to the SMTP server to test the email alerting function. Format Mode logging email test message-type {urgent |non-urgent |both} message-body Global Config Utility Commands 542