Netgear M4100-D12G CLI Manual - Page 613

ProSafe M4100 and M7100 Managed Switches • Group 9 - Event Controls the actions that are taken when an event occurs. RMON events occur when: • A threshold (alarm) is exceeded • There is a match on certain filters. RFC 3273 • Group 1 - Media Independent Group Contains media-independent statistics that provide information for full and/or half-duplex links as well as high capacity links. • Group 2 - Ether Stats High Capacity Group Contains the High Capacity RMON extensions to RMON-1 etherStatsTable (RFC 2819 Group 1). • Group 3 - Ether History High Capacity Group Contains the High Capacity RMON extensions to RMON-1 etherHistoryTable (RFC 2819 Group 2). RFC 3434 • Group 1 - High Capacity Alarm Control Group Controls the configuration of alarms for high capacity MIB object instances. • Group 2 - High Capacity Alarm Capabilities Group Describes the high capacity alarm capabilities provided by the agent. • Group 3 - High Capacity Alarm Notifications Group Provides new rising and falling threshold notifications for high capacity objects. rmon alarm This command sets the RMON alarm entry in the RMON alarm MIB group. Format Mode rmon alarm alarm number variable sample interval sampling type rising-threshold value falling-threshold value startup rising/falling/rising-falling owner string Global Config Parameter Alarm Number Alarm Variable Description The Alarm number which identifies an Alarm. The object identifier of the particular variable to be sampled. Only variables that resolve to an ASN.1 primitive type of integer. Utility Commands 613