Netgear ME101 ME101 User Manual - Page 13
Enabling WEP Security on the Bridge - configuration
UPC - 606449026634
View all Netgear ME101 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Enabling WEP Security on the Bridge To prevent others from accessing your wireless network, you may want to enable WEP (Wired Equivalent Privacy) security in your wireless router or access point. If you do so, you'll need to enable WEP security in the bridge, too. You use the configuration utility to change the security setting for the bridge. To do so, you must have the bridge directly connected to a computer. See Installing the ME101 on page 4 and Installing the Configuration Utility on page 8. If you filled in the parameters on page 7, you may want to refer to them for this procedure. Note: The default security setting has WEP security disabled. 1. Choose Programs>NETGEAR ME101 Bridge>ME101 Configuration Utility from the Start menu. 2. If the bridge's name doesn't appear in the Bridge Name list, select Browse to have the utility search for an active bridge. 3. Type the password. (password is the default.) 4. Click Login. 5. Click the Security tab. 6. Select the type of security you have set in your wireless router or access point-either 40/64 or 128 bit. 7. If the key is determined through software, select Create with Passphrase and type the phrase in the Passphrase box. OR If you entered a key manually for your wireless router or access point, select Manual Entry and type the encryption keys that are used with the wireless router or access point. 8. Click Apply. 9. If you are through making changes, click Exit. 11