Netgear ME101 ME101 User Manual - Page 7
Connecting One Device - setup
UPC - 606449026634
View all Netgear ME101 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Connecting One Device Default Ethernet DC in 5V Antenna ME101 Wireless Ethernet Bridge Gaming console or other Ethernet-enabled device Note: If you want to connect multiple devices, see the procedure on page 6. 1. Turn off the gaming console or other Ethernet-enabled device. 2. Connect the provided Ethernet cable between the ME101 Wireless Bridge and the gaming console or other Ethernet-enabled device. 3. Connect the power adapter to the wireless bridge and plug the power adapter in to a power outlet. The Power and Wireless LAN lights should light up. 4. After you see the Wireless LAN light Ethernet-enabled device. light up, turn on the gaming console or other If the bridge and the Ethernet-enabled device are successfully connected, the Network light will light up. This light flashes when there is network activity. Note: If your setup works with the default settings, you don't need to install the software from the provided CD to configure the bridge unless you need to change the Country/Region setting from the default setting (U.S.A.) or you have more than one ME101 bridge on your network. 5