Netgear ME101 ME101 User Manual - Page 15
Configuring the bridge settings, Wireless Network Name, Warning, Changing the password - wireless ethernet bridge access point
UPC - 606449026634
View all Netgear ME101 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Configuring the bridge settings: 1. Type http:// and the IP address of the bridge as the web address in the browser and press Return. (The default is 192.168.0.200.) You'll see the Information page. 2. To select a Wireless Network Name (SSID) for the bridge to connect to, click Wireless Settings. 3. Type admin as the User ID and type password as the Password. 4. Click OK. 5. Type the Wireless Network Name (SSID) of the wireless router or access point. 6. If you're not in the United States, select the correct country or region from the Country/Region list. Click Yes to accept the new country or region. Warning: Having the bridge set to the wrong country or region may result in the violation of local laws. 7. Click Apply and if you're through making changes, click Logout. 8. To use the bridge with one or more different Ethernet-enabled devices, see Installing the ME101 on page 4. Changing the password: 1. Start your browser software. 2. Type http:// followed by the IP address for the bridge as the web address and press Return. (The default is 192.168.0.200.) You'll see the Information page. 3. To change the password, click Change Password. 4. Type admin as the User ID and type the current password as the Password. (password is the default.) 13