Netgear ME103 ME103 Reference Manual - Page 24
Default Factory Settings, ME103, Wireless Access Point Rear Panel - default password
UPC - 606449026375
View all Netgear ME103 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Reference Manual for the ME103 802.11b ProSafe Wireless Access Point Default Factory Settings When you first receive your ME103, the default factory settings will be set as shown below. You can restore these defaults with the Factory Default Restore switch on the rear panel - see "ME103 Wireless Access Point Rear Panel" on page 2-7. FEATURE User Name (case sensitive) Password (case sensitive) Operating Mode Access Point Name DHCP IP Configuration (if DHCP server is unavailable) Network Name (SSID) Broadcast Network Name (SSID 802.11b Radio Frequency Channel WEP Restricting connectivity based on MAC Access Control List WEP 802.1x SNMP FACTORY DEFAULT SETTINGS admin password Access Point NETGEARxxxxxx where xxxxxx are the last six digits of the wireless access point's MAC address DHCP client IP Address: 192.168.0.224 Subnet Mask: 255.255.255.0 Gateway: 0.0.0.0 Primary DNS Server: blank Secondary DNS Server: blank NETGEAR Enabled 11 Disabled Disabled Disabled Disabled Disabled 3-3 Basic Installation and Configuration August 2003