Netgear ME103 ME103 Reference Manual - Page 42
Table 4-1., General Information Fields
UPC - 606449026375
View all Netgear ME103 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Reference Manual for the ME103 802.11b ProSafe Wireless Access Point Table 4-1. General Information Fields Field Access Point Information Description Access Point Name MAC Address Country Domain Firmware Version Current IP Settings IP Address Subnet Mask Gateway IP Address Source Wireless Settings Wireless Network Name (SSID) Channel Operating Mode Security Settings The default name may be changed if desired. Note: In 802.1x mode, this name is used as the client Login name for the RADIUS server. Displays the Media Access Control address (MAC address) of the wireless access point's Ethernet port. Displays the domain or region for which the wireless access point is licensed for use. It may not be legal to operate this wireless access point in a region other than one of those identified in this field. The version of the firmware currently installed. These parameters apply to the Local ME103 firewall. The IP address of the wireless access point. The subnet mask for the wireless access point. The default gateway for the wireless access point communication. Automatic (DHCP client) indicates that the current IP address was obtained from a DHCP server on your network. These parameters apply to the target remote ME103 firewall, VPN gateway, or VPN client. Displays the wireless network name (SSID) being used by the wireless port of the wireless access point. The default is NETGEAR. Identifies the channel the wireless port is using. 11 is the default channel setting. See "Wireless Channels" on page B-7 for the frequencies used on each channel. Identifies the operating mode of the ME103. Authentication Encryption 802.1x WEP or 802.1x authentication setting. The current WEP or 802.1x encryption setting. The current 802.1x setting. 4-2 Maintenance August 2003