Netgear ME103 ME103 Reference Manual - Page 37
How to Restrict Wireless Access by MAC Address, Wireless Card Access List Setup - setup #
UPC - 606449026375
View all Netgear ME103 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Reference Manual for the ME103 802.11b ProSafe Wireless Access Point How to Restrict Wireless Access by MAC Address To restrict access based on MAC addresses, follow these steps: 1. Log in to the ME103 using the MDI/MDIX name printed on the bottom of the unit or at its default address of http://192.168.0.224 or at whatever IP address the unit is currently configured. Use the default user name of admin and default password of password, or whatever LAN address and password you have set up. Note: When configuring the ME103 from a wireless PC whose MAC address is not in the access control list, if you select Turn Access Control On, you will lose your wireless connection when you click Apply. You must then access the wireless access point from a wired PC or from a wireless PC which is on the access control list to make any further changes. 2. From the Wireless Settings menu, click the Setup Access List button to display the Wireless Access menu shown below. Figure 3-10: Wireless Card Access List Setup 3. Click Add to add a wireless device to the wireless access control list. The Wireless Adapter Access Setup menu displays. Basic Installation and Configuration August 2003 3-16