Netgear ME103 ME103 Reference Manual - Page 66
The Wireless LAN activity light does not light up., The LAN light is not lit.
UPC - 606449026375
View all Netgear ME103 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Reference Manual for the ME103 802.11b ProSafe Wireless Access Point The Wireless LAN activity light does not light up. The access point's antennae are not working. • If the Wireless LAN activity light stays off, disconnect the adapter from its power source and then plug it in again. • Make sure the antennas are tightly connected to the ME103. • Contact NETGEAR if the Wireless LAN activity light remains off. The LAN light is not lit. There is a hardware connection problem.Check these items: • Make sure the cable connectors are securely plugged in at the access point and the network device (hub, switch, or router). A switch, hub, or router must be installed between the access point and the Ethernet LAN or broadband modem. • Make sure the connected device is turned on. • Be sure the correct cable is used. Use a standard Category 5 Ethernet patch cable. If the network device has Auto Uplink™ (MDI/MDIX) ports, you can use either a cross-over cable or a normal patch cable. I cannot access the Internet or the LAN with a wireless capable computer. There is a configuration problem.Check these items: • You may not have restarted the computer with the wireless adapter to have TCP/IP changes take effect. Restart the computer. • The computer with the wireless adapter may not have the correct TCP/IP settings to communicate with the network. Restart the computer and check that TCP/IP is set up properly for that network. The usual setting for Windows the Network Properties is set to "Obtain an IP address automatically." • The access point's default values may not work with your network. Check the access point default configuration against the configuration of other devices in your network. 6-2 Troubleshooting August 2003