Netgear ME103 ME103 Reference Manual - Page 33
Understanding Basic Wireless Security Options, Wireless Network Name SSID., NETGEAR
UPC - 606449026375
View all Netgear ME103 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Reference Manual for the ME103 802.11b ProSafe Wireless Access Point • Wireless Network Name (SSID). The SSID is also known as the wireless network name. Enter a value of up to 32 alphanumeric characters. In a setting where there is more than one wireless network, different wireless network names provide a means for separating the traffic. Any device you want to participate in a particular wireless network will need to use the SSID. The ME103 default SSID is: NETGEAR. - A group of Wireless Stations and a single access point, all using the same ID (SSID), form a Basic Service Set (BSS). - Using the same SSID is essential. Devices with different SSIDs are unable to communicate with each other. However, some access points allow connections from wireless stations which have their SSID set to "any" or whose SSID is blank (null). - A group of wireless stations and multiple access points, all using the same ID (ESSID), form an Extended Service Set (ESS). - Different access points within an ESS can use different channels. To reduce interference, it is recommended that adjacent access points should use different channels. - As wireless stations physically move through the area covered by an ESS, they will automatically change to the access point which has the least interference or best performance. This capability is called roaming. Understanding Basic Wireless Security Options The table below identifies the various basic wireless security options. A full explanation of these standards is available in Appendix B, "Wireless Networking Basics". Figure 3-9: Basic Wireless Security options Basic Installation and Configuration August 2003 3-12