Netgear PS101 Reference Manual - Page 109
System Tab Fields
UPC - 606449023442
View all Netgear PS101 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 109 highlights
NetGear Print Server Manual Figure 8-4 System Tab Window System Tab Fields Field Description Device Name Choose a descriptive name for the router for identification purposes (for example, EngPrsv). This name is used in all protocols to identify the specific print server. There is a factory default name. For any change, NETGEAR recommends that a name be determined before setting the print server in any network. This name should be no more than 16 characters with at least a non numeric letter. Spaces are not allowed, but dashes (-) and underscore marks (_) are accepted. IPX/SPX Protocol Choose to enable or disable the IPX/SPX protocol used in the NetWare environment. This selection is always shadowed to indicate that the IPX/SPX protocol is always active and cannot be disabled. TCP/IP Protocol Choose to enable or disable the TCP/IP protocol. TCP/IP is used for UNIX networking and Microsoft networking. The factory default is Enable. NetBEUI Protocol Choose to enable or disable the NetBEUI protocol. NetBEUI is primarily used in a small-scale Microsoft networking environment. AppleTalk Choose to enable or disable the AppleTalk Protocol. AppleTalk is used in small networks of Apple 100