Netgear PS101 Reference Manual - Page 24
NetGear Print Server Manual - default password
UPC - 606449023442
View all Netgear PS101 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
NetGear Print Server Manual Configure Server Fields Choose a descriptive name for the print server for identification purposes. This name is used in all protocols to identify the specific print server. There is a factory default name. For any change, Print Server Name NETGEAR recommends that a name be determined before setting the print server in any network. This name should be no more than 16 characters with at least a non numerical letter. Spaces are not allowed, but dashes (-) and underscore marks (_) are accepted. Enter the device password, and again in the Confirm Password field. Once a password is entered, it is Password Confirm Password required in order to gain access and change the configuration. If you forget the password to the print server, the only way to reset it is by resetting the device to factory default through the NETGEAR Print Server Administration Program. Check the corresponding protocols to enable them on the print server. AppleTalk is used to support Enable Protocols AppleTalk printing from Apple computers. NetBEUI is primarily used in a small-scale Microsoft networking environment. A protocol may be disabled if it is not required for your network. 15