Netgear PS101 Reference Manual - Page 37
Reset - default ip address
UPC - 606449023442
View all Netgear PS101 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
NetGear Print Server Manual Reset Clicking the RESET button will reboot the print server. When you change settings for TCP/IP and Wireless, you will need to reset the print server. If the print server is rebooted, any printing job will be disrupted. If DHCP client is enabled, which is the default setting, after system reboots, the IP address of the unit may be changed. Please use the diagnostic button prints out to verify the IP address. 28
NetGear Print Server Manual
28
Reset
Clicking the RESET button will reboot the print server. When you change settings for TCP/IP and
Wireless, you will need to reset the print server.
If the print server is rebooted, any printing job will be disrupted.
If DHCP client is enabled, which is the default setting, after system reboots, the IP
address of the unit may be changed. Please use the diagnostic button prints out to
verify the IP address.