Netgear PS101 Reference Manual - Page 47
Double-click on NETGAER Print Server Setup Wizard in the NETGEAR Print Server window. - windows 10
UPC - 606449023442
View all Netgear PS101 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
NetGear Print Server Manual To set up each PC: 1. Double-click on the desktop icon, as showing Figure 4-8, that you named the group in the previous section, Figure 4-5. 2. Double-click on NETGAER Print Server Setup Wizard in the NETGEAR Print Server window. The NETGAER Print Server window opens, as illustrated below. Figure 4-10 NETGEAR Print Server Setup Wizard Window 3. In this window, you will see whatever network protocols you have installed on the local machine. You need TCP/IP to use web management. Most nowadays operating systems including Microsoft Windows 98, ME, 2000, and XP use TCP/IP as the primary networking protocol. PS101 and PS111W do not support NetWare IPX/SPX environment. Older system, like Microsoft Windows 3.1, may support only Netbios protocol as the Microsoft Network. You must have either TCP/IP or Netbios protocol, or both to use NETGAER PS100 Series print server. 38